Study of damages in bearings proceeding from tensions and currents parasites using the sensor Shaft Probe
DOI:
https://doi.org/10.5935/1809-2667.20110030Keywords:
Bearings, Vibration, Shaft currentAbstract
This works presents the technique of tension analysis and current parasite in shafts of electric engines. It is a predictive technique, recently launched in the market, which uses the sensor shaft probe. This sensor is rested on the shaft of the engine and the signals are collected by the collector/data analyzer UltraSpec 8000. The tests were carried out through a didactic schematic project of the experimental setup in which the different levels of tensions and currents in the shaft of the engine were introduced in the front bearing of an electric motor. A connected direct-current generator coupled to the engine, by means of a flexible coupling, was used as load system. The objective is to know the levels of the amplitude of tension and current allowing a longer life. Vibration analysis, being a traditional predictive technique was also used to validate the experimental tests.Downloads
References
ALMEIDA, M., T.; GÓZ, R. D. S. Análise de vibrações II - rolamentos e engrenagens. Itajuba-MG, Brasil: Fundação de Pesquisa e Assessoramento a Indústria, 2000. p. 102-106.
BRITO, J. N. Desenvolvimento de um Sistema Inteligente Híbrido para Diagnóstico de Falhas em Motores de Indução Trifásicos. 2002. 214p. Tese (Doutorado) - Universidade Estadual de Campinas, 2002.
BUSSE, D.; ERDMAN, J.; KERKMAN, R. J.; SCHLEGEL, D.; SKIBINSKI, G. Bearing currents and their relationship to pwm drives. IEEE Transactions on Power Electronics, v. 12, n. 2, 1997.
ERDMAN, J.; KERKMAN, R. J.; SCHLEGEL, D.; SKIBINSKI, G. Effect of pwm inverters on ac motor bearing currents and shaft voltages. In: IEEE APEC CONFERENCE DALLAS, 1995.
FISCHER, A.; SCHLEGEL, D. W.; SKIBINSKI, G. L. Experience with variable-frequency drives and motor bearing reliability. IEEE Transactions on Industry Applications, v.. 37, n. 5, 2002.
KREMIEN, Z. The additional phenomena which appear in induction motors fed from pwm inverters. In: Proc. EPE’97, 1997, Trondheim, Norway,.
LAMIM FILHO, P. C. M. Programa de manutenção preditiva da planta unidade motor fire unidade 7514. Relatório (Estágio Supervisionado) - Universidade Federal de São João del-Rei, 2001. 110p.
MANUAL SKF de Manutenção de Rolamentos. Publicação 4100 PB, reg. 70.13000, 1997.
RELIANCE ELECTRIC INDUSTRIAL COMPANY. Instalação, operação e manutenção de motores de indução industriais. Armações (NEMA) 180 - 449, (IEC) 112 - 280P, 1999.
STACK, J. R.; HABETLER, T. G.; HARLEY, R. G. Experimentally generating faults in rolling element bearings via shaft current. IEEE Transactions Industrial Applications, v. 41, n. 1, 2005.
STACK, J. R.; HABETLER, T. G.; HARLEY, R. G. Effects of machine speed on the development and detection of rolling element bearing faults. IEEE Power Electron Lett., v. 1, n. 1, p. 19-21, 2003.
STACK, J. R.; HABETLER, T. G.; HARLEY, R. G. Fault classification and fault signature production for rolling element bearings in electric machines. IEEE Transaction Industrial Application, v. 40, n. 3, p. 735-739, 2004.
ULTRA SPEC MOTOR. Motor analysis application, n. 1.10, 1997.
Downloads
Published
Issue
Section
License
The authors of the manuscript submitted to Vértices, hereby represented by the corresponding author, agree to the following terms:
The authors retain the copyright and grant Vértices the right of first publication.
At the same time the work is licensed under the Creative Commons Attribution 4.0 International License, allowing third parties to copy and redistribute the material in any medium or format and to remix, transform, and build upon its content for any legal purpose, even commercially, provided the original work is properly cited.
Authors will not receive any material reward for the manuscript and Essentia Editora will make it available online in Open Access mode, through its own system or other databases.
Authors are authorized to enter into additional contracts separately for non-exclusive distribution of the version of the work published in Vértices (eg, publish in institutional repository or as book chapter), with acknowledgment of authorship and initial publication in this journal.
Authors are permitted and encouraged to disseminate and distribute the post-print (ie final draft post-refereeing) or publisher's version/PDF at online information sources (eg, in institutional repositories or on their personal page) at any time after the first publication of the article by Vértices.
Essentia Editora may make normative, orthographic and grammatical changes in the originals in order to maintain the standard language, with the final consent of the authors.
The content and opinions expressed in the manuscript are the sole responsibility of the author (s).
How to Cite
1.png)
